Home

Cruiser bag

Bag Sizes

Testimonials

Catalog/Prices

Orders

Warranty

Shipping

Contact Us

FAQ

Dealers Wanted

Photo Gallery

Cruiser Bag             Patent No.  US 6,491,193 B2

Click on any picture to enlarge

The Cruiser Bag comes in 3 sizes and 2 finish styles: studded or plain black to suit various tastes. 

For dimensions please visit Bag Sizes page.

Bigger version of The Bag is large enough for two full face helmets - 13" in diameter and 21" in length. The handle located at the top allows for easy portability. Thanks to the universal quick release mounting system and three different sizes The Bag fits any cruiser bike.

The backrest cushion attaches to The Bag with two strips of Velcro and is adjustable in two ways. It can be moved up or downward by approximately four inches. Additionally, the lower portion of the cushion can be rolled tighter or looser depending on the desired level of lumbar support. It can also be installed in upside-down position for higher back support.

Both sides of The Bag open for easy access - 3 snaps per side. There are two additional snaps at the bottom which allow one to take the cover completely off. When the side covers are closed there is a 4" overlap at the top and a 2" lip at bottom which allow for a tight water resistant seal.

The core of The Bag is made from an extruded hard PVC which quarantees stiffness even when The Bag is empty. It is covered inside and out with smooth, easy to maintain synthetic leather. This material is very durable and does not dry up, fade or crack like natural leather tends to.

For solo riding The Bag sits on passenger seat (sissy bar not required for installation) and is tied down with four webbing straps (2 per side). They are wrapped around any sturdy point on the bike such as the top of the shocks, the rail on rear fender, the back turn signal bar or saddle bag support frame. By changing the length of the front and rear straps The Bag can be moved forward or backward to better suit the rider's preferred position. Quick-release cam buckles allow for fast and easy installation as well as removal of The Bag.

For two-up riding, The Bag installs on luggage rack. The two front straps are wrapped around any sturdy points on the bike. The other two straps run under the luggage rack and are tied down to the cam buckle on the opposite side.


 
Copyright 1999-2008 The Cruiser Bag Co. All rights reserved